Atomic Backland Carbon Boots for Hardboot Splitboarding
Many vertical meters have been climbed in my Atomic Backlands!
I have been using my Atomic Backland Carbon boots (2018/19 version) for two years now, after making the decision to switch from a softboot to a hardboot setup on my splitboard. These boots have taken me up some of the finest peaks surrounding Tromsø and Lyngen and I figured now is a good time to review their performance. I found it difficult to choose which hardboots to go for when I made the switch, and hopefully this review can help out anyone who might be considering the Backlands.
First off, it’s worth noting that the 2019/20 version of these boots are now out, and they have an adjustable forward lean mechanism which is a great addition and makes them a solid choice for the aspiring hardbooter. That said, with the 2018/19 version now a few years old it might be possible to pick up a pair for a good price for those wanting to keep costs down. Buying a completely new binding and boot system is expensive!
There is definitely an adjustment period to riding in hardboots, but once you’ve been out on a few trips and get used to the responsiveness of the system the benefits far outweigh the cost in my opinion! The whole setup in stiff, so I tend to ride without the plastic insert and with my boots not overtight to allow some flex in the system.
Pros:
Super comfortable, especially after several trips – the boots feel as comfy as my regular hiking boots.
Frictionless pivot system makes walk-mode a dream. The way up is smooth and, well, frictionless.
The range of motion in walk mode exceeds any limits you are likely to encounter.
Relatively lightweight (at least compared to my previous softboots, the Jones 32 MTB).
Easy switch between ride and walk mode, which makes skiing short sections on the ascent much easier and more controlled.
Quick transitions! This is important, and being able to hike up with the boots completely fastened and tightened is a massive bonus.
Cons:
Some of the small wires that keep the straps locked in place have broken off – but this is after some very heavy use!
The Velcro power strap has also come gradually unstitched with heavy use.
Cannot adjust forward lean (on this version – though can modify by using the Phantom Bindings Link Lever).
Forward lean is ok, but perhaps slightly aggressive for some riders, though I got used to it pretty quickly.
No lateral flex in the boots can take some getting used to. I definitely recommend installing canted pucks if you go for the Spark Dyno setup.
In Summary:
If you are looking to grab a pair of (relatively) cheap boots for venturing into the world of hardboot splitboarding, I would definitely recommend the Atomic Backland Carbons. They are incredibly comfortable, have an impressive range of motion, and have kept my feet plenty warm enough on even the coldest and steepest days.
Others things that might be worth considering that I have not explored yet:
Adding Phantom Bindings Link Lever to your AT boots
Drilling holes into boots to increase flex
Buying AT boots with built-in forward lean adjustment (e.g. 2019/20 Backlands)
Phantom are also releasing a splitboard-specific hardboot for 2020/21
This review is not sponsored or affiliated to any of the companies or systems described, and is just a fair review of the equipment based on my experience.
Thank you for reading my review, I hope it helps make a few decisions or at least entertains a few mountain enthusiasts out there. Let me know in the comments sections below if you have any feedback, questions, or hardboot suggestions/tips! See my previous post for thoughts on making the switch from softboots to hardboots.
- Calvin -
Switching to crampons in hardboots is much faster, and climbing ice/snow/rock sections is far easier than in softboots.